Full-Wrap Handles
Stihl MS440, MS 460, 461, 044, 046 Handle – $130.00 with $12 flat rate shipping in the lower 48 states.
Stihl MS660, MS650, 066, 065, 064 Handle – $130.00 with $12 flat rate shipping in the lower 48 states.
Husqvarna Chainsaw Handle Wrap Kit (Fits Models: 365/372XP) Model: 588 84 63-02. Only 5 In-Stock. Husqvarna Chainsaw Handle Wrap Kit (Fits Model: 395XP) Model: 588 94 62-01. Only 1 In-Stock. We have 1000’s of used and new mcculloch chainsaw parts. We just bought out a large mcculloch dealer this summer and got lots of NOS chainsaw parts. We have lots of used mcculloch parts. Especially for common models like 10-10, pro mac, 10 series, super pro series, 610, power mac, timber bear and many many other models. To make the Jonsered bar fit you would have to make the slot a bit longer at the back, they won't quite fit between the clutch drum and stud as it is if the saw has a full wrap handle installed. I think the bar adjuster should be close enough to work, might still take a little filing to let it drop in to place. 214691 McCulloch Switch Retainer On/Off OEM Original Part fits 10-10, 700, 800 and more. $ 7.89 214723 Handle Assembly w/ Throttle Link and Trigger NOS OEM $ 51 Genuine McCulloch OIL PUMP CAP $ 15.49 Sale. $10.5 - 2 bids $10.0. Valve Depth Gauge Engine Flywheel Fuel Cap Fuel Filter Fuel Line Fuel Line Kit Fuel Tank Gasket Guard Guide Bar Guide Bar & Chain Handle Ignition Coil Ignition Module Intake Boot Muffler Oil Cap Oil Line Oil Pump Oil Tank On/Off Switch. For Craftsman For Homelite For Husqvarna For John Deere For McCulloch For.
Mcculloch 10 10 Automatic
Weber Customs Inc. is a small business located in Kalispell, Montana – an area grounded and steeped in a rich logging heritage. Sadly, logging has nearly come to a standstill over the last decade. The men and women that remain in the timber industries, continue to fight for their way of life, and persist in holding out for a better tomorrow.
Mcculloch 10 10 Full Wrap Handlebars
Although logging is in a down-turn, our hope is that it will make a come back. Looking forward to that day and to the needs of the present day, WCI Inc. (Weber Customs Inc.) has begun manufacturing a tough, professional full-wrap chainsaw handle.
The first prototypes were developed and sent out in 2009 to be tested by loggers and forest professionals in Idaho, Washington, and Oregon State. The feedback we received told us that they stood up to logging and wildland fire environments, and that few design changes were needed. A limited production run was done in 2010 and steps toward full production started in January 2012.
Our handle fabrication begins with an aircraft grade aluminum tubing for the main body and side support. The bottom mount is machined from a billet aluminum bar stock, a mount unique to our handles, and unparalleled in strength. They are then coated with a very tough two-part polyurethane, which not only strengthens the tubing, but provides a superior gripping surface for a bare or gloved hand. This coating far exceeds a rubber sleeve that adds no strength to the handle, and often becomes loose, or tares leaving gaps and slits in the material.
Initially, our handles were marginally smaller in circumference than a factory handle. The diameter of the tubing we used is the same as other production handles, but our coating wasn’t as thick as the rubber sleeves they apply. Over-coating the handles was never an option, as it would offer no significant benefit, and only add to the price of production. Some of our customers liked the slightly smaller feel and some wanted a little more to hold on to.
The first full-wrap handles we will produce, will be for a few select models of Stihl chainsaws. As the popularity of our product increases, we will continue to add other models, as well as other popular manufacturers such as Husqvarna. At this time, we have no intention of making either half-wrap or 3/4 -wrap handles.
Comments are closed.